Why does my nail gun not shoot nails?
Why does my nail gun not shoot nails?
Jams are typically caused when nails feed incorrectly and wedge against the driver blade, preventing the tool from cycling. Jams are the most common cause of a nailer not firing. For safety, first disconnect the tool from the air supply, retract the feeder mechanism, and remove any excess fasteners from the magazine.
Why is my paslode not firing?
Possible causes for a Paslode nail gun not firing are: A nail jam is stopping the nails from moving forward. The gas fuel cell is empty, out-of-date or not attached properly. The nailer needs cleaned – especially if it has been used a lot without regular cleaning!
Where is the spark plug on a Paslode?
Paslode has been making cordless nailers for 25 years. The spark plug, or igniter, is an internal part and requires the rear of the tool be disassembled to access it.
Why is my paslode not firing nails?
What gas is in Paslode fuel cells?
The fuel is a mixture of 1-butene and propane. The fuel cells are designed to last for 1,000 rounds each, which makes them desirable for heavy duty projects where thousands of nails or staples are needed.
Why is my Paslode charger flashing red and green?
If battery is completely discharged, the red and green lights may flash back and forth for up to 20 minutes. This safety feature slowly recharges the battery until it is ready to accept the full charging current. If the red and green light continue to flash after 20 minutes, replace the battery.
How long does Paslode fuel cell last?
about 27 months
Paslode fuel cells have a long shelf life with the inbuilt design and metering valve system enabling the product to be stored for about 27 months.
Why is my Paslode nail gun not firing?
Possible causes for a Paslode nail gun not firing are: A nail jam is stopping the nails from moving forward The gas fuel cell is empty, out-of-date or not attached properly The wrong type of Paslode nails are being used Non-Paslode nails, gas, etc. are being used
How do I troubleshoot a problem with my Paslode?
You’ll have received a user manual with your Paslode which contains troubleshooting information. Read through it and see if a solution is provided for your problem. The solutions provided are for more minor issues, like how to clear a nail jam. If you can’t find your manual, you can download one here.
What are the parts number of the im250s?
TOOL SCHEMATIC AND PARTS Part No. 916000 Model IM250S Li STRAIGHT 16Ga. FINISH NAILER PARTS LEGEND 1 904555 1 Grille * 2 900648 1 Filter 3 901064 4 Shoulder Screw 8-32 x 1-3/8” 4 902446 1 Cap 5 904557 2 Scre w, SHC (yellow) 6 901119 1 Retaining Ring 8
What is the model number of the im250s Li straight 16ga?
Part No. 916000 Model IM250S Li STRAIGHT 16Ga. FINISH NAILER IMPORTANT! DO NOT DESTROY Always refer to operating manual for detailed information on this tool. It is the customerʼs responsibility to have all operators and service personnel read and understand this information. TOOL SCHEMATIC AND PARTS Part No. 916000
