Is 302 and 351 distributor the same?

Is 302 and 351 distributor the same?

The distributor in the 351w is the same length as the 302 distributor, but the 351w does use a larger diameter oil pump drive shaft. The larger drive shaft will require the larger diameter distributor shaft. The shaft diameter of the 302 distributor is .

Can you use a 302 distributor fit a 351W?

Registered. Windsor distributors can be interchanged between all engines from 221 cid to 5.0L. However, because of the taller deck height, a 351W distributor is longer, and will not fit a 302 block, nor will a 302 distributor fit a 351W.

Will a 302 distributor fit a 390?

Yes it will fit.

Will a 351W oil pump fit a 302?

For the 351w swap pan you have to use a 302 oil pump? Kym, this Ford Racing 351 Swap pan is intended t use a 302 oil pump and 302 oil Pump driveshaft such as the ARP-1547904. The length on the oil pumps and oil pump driveshafts are different between the 302 and 351 so they must be matched for proper fitment.

What is the difference between a 302 and a 351 Windsor distributor?

On a 302 (or smaller c.i.d.) blocks, the distributor mount is almost flush with the top of the block (where the intake sits). A 351W block is taller. So, the distributor mount is below the block surface where the intake sits. There is also more space between the water passages and the cylinder heads.

Will a 302 distributor fit a 460?

No. 302 distributor only works in 289/302. 429/460 uses the same distributor as the 35C/351M/400M engines.

What is the stock bore size of a Ford 302?

Ford Engine Bore and Stroke Chart

How do I know what 302 I have?

If you wish to further pinpoint the date of your Ford 302 engine, look at the four-digit alphanumeric date code stamped into the engine block just below the distributor at the front of the engine. The first character is a number and indicates the year.